Bridge Display

Close Up Photos

Items in this Display

Commander Riker’s Little John Costume The costume consists of a grayish blue colored shirt with drawstrings, brown woven tights with feet, a brown leather jerkin, a tan buckskin hat with feathers and replica belts, boots and a sword in a scabbard. View Full Item

Commander Riker's Host Costume The costume consists of a long-sleeved blue jacket with a replica combadge, matching pleated blue trousers and a metallic blue long-sleeved shirt with vertical black stripes and diagonal textured stripe accents along the collar, cuffs, and shoulders. View Full Item

Spock's Romulan Costume The four-piece costume, worn by Spock throughout the episodes, includes a gray ribbed knit cotton mock turtleneck sweater; a gray tweed tunic squared off at the shoulders with flicks of teal and maroon; gray/brown/blue cropped tweed trousers with attached suspenders; and a brown/red/blue/gold upholstery fabric floor-length robe squared off at the shoulders. View Full Item

Sarek's Meditation Costume The costume consists of a cream textured, diamond patterned, nylon floor length tunic with a metallic gold mesh lining and trim decorated with copper metallic Vulcan letters made by Maggie Schpak with a matching long-sleeve blouse. View Full Item

Kamala's Dress The costume consists of a full-length gown of two-tone silver-gray and red silk chiffon, the bodice with pleated detail. View Full Item

Noor's Judge Costume The costume consists of a bluish gray full-length long-sleeved suede jumpsuit with pleated sides with a zip down the front, zip cuff adjustments and foot stirrups, a pleated mock turtleneck dickey, ... View Full Item

Alexander's Cowboy Costume The costume consists of a pair of light brown two pocket corduroy pants, a light brown and tan patterned shirt that has an additional panel that buttons up over the chest, a dark brown patterned bandana and a mottled brown buttoned two pocket vest. View Full Item

Skull-faced Alien Costume The costume is made of an inverse pyramidal shaped metallic like material with the tunic silver and pants black. The tunic and elbow length sleeves are made of 1 ½ʺ squares, pants 1ʺ and the forearms ½ ʺ. The costume comes with a silver leather belt, harness, and shoulder pieces with sewn on silver and black studs, a metallic black knit fabric around the neck, a pair of silver neoprene gloves… View Full Item

Enterprise D Graphic LCARS Panel The panel is made of black and clear film with colored gel on the verso filling the clear areas. The screen matched panel displays the USS Enterprise (NCC-1701-D) in a "plan view"... View Full Item

Enterpirse-C Graphic LCARS Panel The panel is a parallelogram (65" x 43") and is made of black and clear film with light blue, green and red colored gels on the verso filling the clear areas. The screen matched panel displays the USS Enterprise-C (NCC-1701-C) in a "front view." View Full Item

Stellar Fragment Paths LCARS Panels The panel is 53" x 30" and is made of black and clear film with colored gel on the verso filling the clear areas. The screen matched panel depicts various information on the stellar fragments path and the Moab IV system. View Full Item

Borg Sentinel One of Two Skull One of Two’s skull was digitally sculpted by Neville Page and 3D printed and finished by Vincent Van Dyke. The jaw was printed separately, as well as the teeth which snapped into place. The Borg skull (9” x 6” x 8”) was painted to look like aged bone with black metallic Borg appliance and white enameled teeth. A production made black stand with a gold nameplate printed in black completes… View Full Item

Cardassian Gul Dukat Skull Dukat’s skull was digitally sculpted by Neville Page and 3D printed and finished by Vincent Van Dyke. The jaw was printed separately, as well as the teeth which snapped into place. The Cardassian skull (10” x 6” x 8”) was painted to look like aged bone with white enameled teeth. A production made black stand with a gold nameplate printed in black completes the display. View Full Item

Ferengi Grand Nagus Zek’s Skull Zek’s skull was digitally sculpted by Neville Page and 3D printed and finished by Vincent Van Dyke. The jaw was printed separately, as well as the teeth which snapped into place. The Ferengi skull (~ 10” x 10” x 9”) was painted to look like aged bone with stained white enameled teeth. A production made black stand with a gold nameplate printed in black completes the display. View Full Item

Klingon General Martok’s Skull Martok’s skull was digitally sculpted by Neville Page and 3D printed and finished by Vincent Van Dyke. The jaw was printed separately, as well as the teeth which snapped into place. The Klingon skull (~ 7” x 11” x 9”) was painted to look like aged bone with stained white enameled teeth. A production made black stand with a gold nameplate printed in black completes the display. View Full Item

Lihn Zhee Chieftain M’Talas’ Skull M’Talas’ skull was digitally sculpted by Neville Page and 3D printed and finished by Vincent Van Dyke. The jaw was printed separately, as well as the teeth which snapped into place. The Lihn Zhee skull (18” x 16” x 8”) was painted to look like aged bone with light green and metallic highlights with stained white enameled teeth. A production made black stand with a gold nameplate printed … View Full Item

Saurian Commodore Y’Shi’s skull Y’Shi’s skull was digitally sculpted by Neville Page and 3D printed and finished by Vincent Van Dyke. The jaw was printed separately, as well as the teeth which snapped into place. The Saurian skull (~ 7” x 12” x 10”) was painted to look like aged bone with stained white enameled teeth. A production made black stand with a gold nameplate printed in black completes the display. View Full Item

Vulcan Director Sarek Skull Sarek’s skull was digitally sculpted by Neville Page and 3D printed and finished by Vincent Van Dyke. The jaw was printed separately, as well as the teeth which snapped into place. The Vulcan skull was painted to look like aged Vulcan blueish-green bone with white enameled teeth. A production made black stand with a gold nameplate printed in black completes the display. View Full Item

Narek’s Distressed Jumpsuit The costume consists of a distressed front zip black jumpsuit with black leather insets on the sides and the shoulders with zip pockets and a rear belt, a heathered gray long sleeve twill shirt and a pair of black leather boots with sides zips. View Full Item

Dr. Adam Soong’s Panel Suit The costume consists of a double-breasted single notch lapel suit jacket in brown with thin blue lines, a matching pair of suit paints with front slash pockets and two rear slit pockets, long sleeve Anto blue dress shirt with pearl buttons and double cuffs, Anto stone blue tie, bluish gray knit socks, Hugo Boss abalone silver square cuff links, and To Boot New York brown monkstrap shoes. View Full Item

Lal's Costume The costume consists of a lavendar sleeveless dress with a red long sleeved blouse. View Full Item

Lal's leg and foot The leg and foot are made of foam latex and painted with a metallic color to resemble Data. Decorative simulated metal structural supports are inserted in both parts and the leg’s lights up. Tom Spina completed the presentation with a display to resemble the shot in the episode. View Full Item

Young Picard’s Starship Model The plastic Starship model is custom painted silver with unique Aztec patterning and blue accents. It measures almost 19 in. long and 10.5 in. wide. It was assembled from a vintage 90’s AMT U.S.S. Reliant model kit. View Full Item

Betazed Matte Painting This highly detailed painting has a common feature used in many matte backgrounds: a patch of painted black on the bottom half. This enabled special effects artists to splice in the live-action footage of Riker and Troi that was filmed at the Huntington Library Botanical Gardens in Pasadena, California. The matte painting was accomplished in mixed media on 71" x 42" glass in a pine frame. It was p… View Full Item

Mordanite Disruptor Rifle The rifle is based on the Klingon Disruptor rifle. It is constructed of cast resin with a clear acrylic tip wrapped with two pieces of silver tape. The body is painted metallic pewter with the pistol grip and butt painted flat black. The stock can be removed from the pistol by pushing a metal knob at the joint and rotating the stock. The rifle measures 24.5" x 10" x 2" x 3". View Full Item

Picard's Vashti Costume and Fedora The costume consists of tan linen pants with a zip fly, a James Perse white linen shirt and a Goorin Bros off white straw fedora with a tan ribbon around the brim and brown leather band with a buckle. View Full Item

Nenebek Mining Shuttle Model The visual effects distressed rust colored shuttle model, made by Gregory Jein, is made from cast resin and glass fiber with plastic details. The model measures 18" x 7" x 11". It is marked "NAR21166." View Full Item

Klingon Qa'vak Spear The spear, designed by visual effects supervisor Dan Curry who also directed the episode, is crafted of different rubber (gray) and metal colored (bronze, copper, aluminum and gold) rods ending in a non-sharpened point. View Full Item

Klingon Painstik The item is a machined aluminum rod in various diameters with black colored Klingon iconographic lettering adhered to it, a black and gold colored molded resin grip at the fore, and a soldered brass electrode prod end. The item is painted with metallic gold and silver accents to suggest hardware and measures approx. 30.5' long with a 1.5" diameter. View Full Item

Data’s Forearm and Circuitry The arm is made of foam latex around a fiberglass frame painted to match Data’s skin color. It has working lighted electronics inserted that can be seen when the forearm flap is lifted. Brett Jones restored the electronics. Tom Spina restored the forearm and completed the presentation by mounting the arm and adding a partial replica sleeve. View Full Item

Rutian Phaser Rifle The duel handled rifle is made of black resin and painted with silver, copper, and iridescent blue accents. It measures 15.5” x 5” x 3” x 1”. View Full Item

Ktarian Game Headset The headset has an adjustable metal headband, light metallic blue resin sliders and pods with clear adjustable acrylic arms and brass emitter tips. When you depress buttons at the back of each pod green lights on the side of each pod illuminate. View Full Item

Borg Wall Panel These panels are seen on the walls throughout the Borg Cube. The rectangular panel (11 ½ x 5 ½ inches) with rounded edges is constructed of flat black Crescent matboard printed with gold lines and translucent red symbols. View Full Item

Iyaaran Shuttle Model The visual effects gray and purple colored shuttle model, made by Gregory Jein, is made from cast resin and glass fiber with plastic details. The model measures 19" x 8" x 12". It is marked "BCD31775." View Full Item

Dr. Soong's Costume The costume is a multi colored checker quilted coat with a symmetrical front seal and a set of blue colored trousers with the distressed hems at the ankles made to appear faded. It also features a pair of textured silk and leather sandals. View Full Item

Antedian Dignitary Costume The costume is a full length metallic fibrous cloth with matching fabric sleeves consisting of two parts. View Full Item

Countess Regina Barthalomew Costume The costume includes a long nylon salmon pink skirt with pleats in the front and gold colored button detail attached to a cream shirt with fine pleats in the front. Worn over the top is a nylon salmon pink jacket with brown lace and pleated detail. A brown belt is attached around the waist with gold-colored circular fastenings. Also included is a white corset and a replica pearl cameo for the neck… View Full Item

Argo Buggy Dashboard & Remote The Argo dash panel is made of particle board and painted silver with a LCARS panel on the front and an extendable computer screen. Two additional control panels are present one showing a map and the other a buggy schematic. View Full Item

Yareena's Fighting Costume *The jumpsuit is made of bunched pink/purple iridescent metallic fabric with a V-neck and a zip up the back. **The headband is constructed of identical fabric and is gathered and sewn in three equidistant areas. The costume and headband were matched with screen shots from the episode. View Full Item

Ambassador T'Pel's Vulcan Costume The costume consists of a Vulcan robe of a reflective blue fabric with inset black lines, a long tabard with red and gold leaf trim with metallic silver dots throughout and a blue felt hat with a silver colored headband... View Full Item

Dr Pulaski's and K'ehleyr's Monitor LCARS This LCARS is 7 in. x 9 ¼ in. The LCARS screen pattern and color were screen-matched to the episodes. View Full Item

U.S.S. Phoenix Sensor Array The sensor array is made of styrene and fiberglass with resin elements, painted white with red and black Starfleet markings and trim. The piece measures 8.5” x 15.5” x 6.5”. View Full Item

T'Pau Hero Model The ring ship, designed by Rick Sternbach, is made from cast resin and fiberglass with plastic details. The ship’s surface is composed of raised geometric patterns and is painted light gray, dark gray, and light blue with gold accents and operating lights. The model measures 19” x 6” x 14”. It is marked with red Vulcan writing and symbols. View Full Item

Borg Drone The costume includes a black waffle knit jumpsuit with built in feet and a zip up the back and between the thighs. Worn over the jumpsuit are rubber imitation metal distressed body, arm and leg plate sections and tube attachments that fasten... View Full Item

Alien Parasite and Carrying Case The parasite is made of cast rubber measuring (6 in. x 3 in.) expertly studio painted and affixed to its original screen used housing consisting of a plastic hinged clamshell case (12 in. x 11 ½ in. x 1 ½ in.) with cast resin and metal components. The case has a painted black interior, gunmetal gray exterior and light blue and fuchsia color striping to the front roll grip portion of the box. It … View Full Item

Picard's Desk Chair and Minitakan Tapestry The swivel desk chair (30 in. × 30 in. x 51 in.) is burgundy and black leather with a chrome base and arm support bases. The Mintakan tapestry (39 in. x 10 in.), which is draped over the chair, is made of light brown hide with sewn on brown beads and light brown, brown and tan twine in geometric patterns and multicolor beads hanging from the one end. The verso of the tapestry is red felt. View Full Item

Joshua Kelly’s Heart LCARS Panel The panel (11 ¾ in. x 14 ½ in.) is made of black and clear film with colored gel on the verso filling the clear areas. The screen matched panel displays Lieutenant Kelly’s heart in cross section noting cardial activity. View Full Item

Dr. Reyga's Costume The costume consists of a full length sleeveless deep red wool jumpsuit, a gold/deep red faux wood grain pattern dickie, a long sleeve undershirt with an inverse pattern and colors from the dickie with gold/black braid around the cuffs and an olive colored over shirt with a multicolored diamond pattern with gold/black braid around the sleeves and an engraved metal buckle on the chest. View Full Item

Blade of T'Kon The prop consists of an aluminum 7 inch wide blade held in place with a polished brass handle mounted on a pole covered with brown leather and wrapped on the top and middle with leather strips. The pole was shortened for subsequent use. View Full Item

Data's Prospero Costume The costume consists of a sleeveless vest of various shades of green and brown in a quasi-camouflage design, similarly patterned piping with a tan background along the sleeves, collar, waist, and down the front,... View Full Item

Spock Reconnaissance Photograph Color photograph 21 1/2" x 15 1/2". It was made intentionally blurry to look like a reconnaissance photograph. This was then projected on a desk top computer screen. View Full Item

“Schisms” Alien Costume with Mask .” The costume* consists of a long robe of shimmering gold metallic fabric with ruffling at the front and a removable hood made of the same fabric. Sewn in Star Trek: TNG tags in the robe and hood read “Steve Parks.” The mask** is made of foam rubber and painted in various colors for a lifelike effect. Tom Spina completed the display by 3D printing and painting matching hands and mounting … View Full Item

Gomtuu Model This pear-shaped ship is made of resin and fiberglass with scale-like detailing and a hole drilled through the bottom by production for mounting. Painted in shades of yellow, orange, brown, and white, this ship features vent-like greebles throughout. Flock was added along the scale seams to give the spaceship a more organic appearance. It measures 30 in. x 17.75 in. x12 in. View Full Item

Mercenary Ship Console LCARS Panels The panel is 10 ½" x 9 ½" and is made of black and clear film with colored gel on the verso filling the clear areas. The screen matched panel depicts the mercenary ship in green in plan view with various colored alien markings. View Full Item

Radu Costume *The costume consists of a burnt orange polyester tunic with decorative black and gold trim along the placket and collar and matching pants with attached black elastic stirrups and suspenders. A tag affixed to the tunic is marked Metro-Goldwyn-Mayer. **The Aldean communicator is made of resin in an elongated hexagonal shape, painted silver and black and backed with Velcro. There are four shaped… View Full Item

Starfleet Academy Matte Painting This highly detailed painting has a common feature used in many matte backgrounds: a patch of painted black on the bottom half. This enabled special effects artists to splice in live-action footage with the stationary illustration. One of those scenes featured Captain Picard and Wesley. This matte painting was accomplished in mixed media on 68.5" x 38.75" Masonite. It was painted by Robert Strombe… View Full Item

Geordi's Tai Chi Top The top is an elastic bone puckered, long-sleeved, martial arts uniform top with a zip up back with white diagonal lined cuff and collar accents. View Full Item

Kolaran Buggy Gun This item is from one of those vehicles, a turret mounted gun made from multiple components of cast resin, metal, plastic, wood, mesh wiring, rope, and colored cloth. The item is painted to appear aged and dirt from the shooting location is still crammed within its crevices. The prop measures approx. 40 x 12 x 6 inches. The display was completed with a custom sheet metal base and mount. View Full Item

Ancient Civilization’s Medallion The circular medallion (5 in. diameter) is made of speckled tan resin with a stylized sun-designed symbol with a masked deity in the center on the front and an off-center moon below a line on the verso. Clay red outlines give the piece and aged look. Production made for the episode. View Full Item

Satarran Head and Chest The fully painted head and chest are made of foam latex and are elaborately sculpted to suggest and alien physiology. The head and chest were screen matched. Tom Spina completed the display by mounting the pieces on a mannequin and by distressing a replica uniform top. View Full Item

Château Picard Bourgogne Crate The prop consists of a pine crate stained very light brown with the following burned into the top and two sides of the box: “Appellation LaBarre Controlee Château Picard Bourgogne Franche-Comte 2386 Product of France 12x750ml.” It also has a sketch of the vineyard and château burned in. The box measures 21 in. x 13 in. x 7 ½ in.” The box also came with the packing straw and the wood bott… View Full Item

20th Century Cryoship Model The model is made of fiberglass with various greebles throughout the hull. Painted in shades of gray and beige, it features two distressed solar panel wings with one blue side and one yellow side, as well as various black decal identification numbers including “4077.” It features four numbered distressed chambers with hand-painted details to appear struck by space debris and scorched. Also pre… View Full Item

DaiMon Bok Costume The costume consists of a brown wool sleeveless jumpsuit with flaps sewn into the side seams covered with a metallic copper patterned ribbon, and a matching cropped jacket featuring a gold buckle on an iridescent mesh vertical loop with gold studs... View Full Item

Worf's Klingon R'uustai Baldric and Tabard The costume consists of a baldric made of metallic silver colored synthetic blend fabric featuring metal studs, a gold resin Klingon insignia, and a gold color leatherette backing, and a full-length tabard made of padded gray synthetic blend fabric with metallic silver colored paneling along the front, shoulders and back. A replica gold resin Klingon insignia completes the baldric, and a replica g… View Full Item

Grankite Order Certificate The 11” x 8 ½” certificate is blue with silver outlines and decorations with a gold Starfleet delta in the center and silver/white text. It reads: “Grankite Order /of Tactics / Class of Excellence / Jean-Luc Picard / In recognition of his development of / The Picard Maneuver / U.S.S. Stargazer Star date 40218.3.” View Full Item

Hedril's Jumpsuit The costume is a long-sleeved, full-size viridian colored cotton jumpsuit featuring suede accents along the shoulders and arms in a bunched design around the upper arms, a glittering white chest inset with clasps... View Full Item

Klingon Bat'leth A double-sided scimitar/hook hybrid-edged weapon with a curved blade, four points, and three handholds on the back. View Full Item

Chateau La Barre 2294 Bottle The clear brown bottle is 11 ¾ inches high and filled with red fluid. It has a gold label and gold capsule and reads “Chateau La Barre 2294,” which is a homage to the label scene in the TNG episode “Family.” View Full Item

Château Picard Réserve Privée 2325 Bottle The clear brown bottle is 11 ¾ inches high and filled with red fluid. It has a red label and capsule and reads “Château Picard Réserve Privée 2325.” View Full Item

Chau Picard Bourdeaux 2355 Bottle The clear brown bottle is 11 ¾ inches high and filled with red fluid. It has a beige label and gold capsule and reads “2355 Chau Picard Bourdeaux.” View Full Item

Château Picard 2401 Bottle The prop consists of a brown clear standard wine bottle with an imitation black wax top and a silver magnesium label with raised letters that read: “Grand Cru Classe Château Picard 2401 Grand Vin De Bordeaux Appellation La Barre Controlle.” There is also an etching of the vineyard in the center of the label. View Full Item

Chateau Picard wine crate 2401 The crate is made of pine with the following burned into the top and two sides of the box: “Grand Cru Classé Château Picard Grand Vin De Bordeaux 2401 Product of France 12x750ml. The box measures 21” x 13” 7.5.” View Full Item

Château Picard Wine Bottle - Bourgogne 2386 The 750 ml olive green clear wine bottles has a tan label with marron line highlights. The label is printed in black and burgundy and reads in pertinent part “Grand Cru Classé Château Picard Bourgogne Franche Comte 2386. The bottle is sealed with burgundy foil with the top having an indented relief of a grape bunch. View Full Item

Château Picard 2249 Bottle The prop consists of a distressed brown clear standard wine bottle with a deep red aluminum foil capsule and distressed off white paper labels with text in black and deep red that read: “…2249… Chateau Picard La Barre Bourgogne-Franche-Comté ….” The label also reproduces the signature of Jean-Luc Picard in deep red. View Full Item

USS Titan Dinner Platter The gold platted platter exhibits pitting and mild discoloration around the pitting. The dimensions are (largest) 36" x 8" x 6". View Full Item

Doctor Crusher's Lab Coat The season one double breasted lab coat is blue green wrong side upholstery velvet with side pockets and a gray silk lining. It was the version Dr. Crusher wore closed since it has silver clasps and thread attachments in the front to close the coat. View Full Item

Starfleet Certificate Of Honor The 11” x 8 ½” certificate is white with blue formal decorations, Starfleet deltas in each corner and blue text. It reads in pertinent part: “Starfleet / Certificate / Of Honor/ ... / The Legion of Honor / To / Jean-Luc Picard / For exceptionally meritorious conduct / in the performance of outstanding services / given under my hand in the alpha quadrant.” View Full Item

Forward Ave 100N Sign The distressed metal sign is painted royal blue with white text and a white outline. It is an isosceles trapezoid -- 19 ½” x 18 ½” x 6”. A replica distressed aluminum street sign holder completes the sign. View Full Item

Picard Day Banner The white cloth banner has hemmed edges and is 9’10” x 2’. The text and drawings are printed in red, green, purple, blue, and yellow and read: “CAPtaiN Picard DAY” and is signed by all the children. View Full Item

Thomas Riker's Distressed Starfleet Uniform The costume is a 2350’s - 2360’s version of the standard Starfleet uniform in operations gold and black with gold piping with the right sleeve completely torn off, a short ragged left sleeve and a torn ragged waist. Also included is a teal long-sleeved wool tunic with tears on the right sleeve and a short torn left sleeve and gray wool, equally distressed trousers, with stirrups for the feet. … View Full Item

Ensign Sito Jaxa Starfleet Uniform This back zip up late season style Starfleet jumpsuit uniform is made of jumbo spandex with a gold asymmetrical front and back, a black yoke extended to the sleeves, black side body panels and black pant legs with black elastic stirrups. View Full Item

Geordi LaForge Starfleet Uniform The costume consists of a black and gold jumpsuit with elastic waistband and zipper front, lavendar long sleeve undershirt, comm badge, three rank pips and black leather boots View Full Item

Counselor Troi Casual Starfleet Uniform The jumpsuit is mauve spandex with a deep lavendar textured neckline and a zipper up the back. Also included are wedge healed purple ankle boots with metal studs with a zipper up the side. View Full Item

Wesley Crusher's Starfleet Uniform This signature grey uniform was Wesley’s main attire after receiving the rank of acting ensign in the second season. The costume is a heathered battleship grey turtleneck jumpsuit with a dark charcoal gray ribbed yolk, collar and cuffs with gray piping. It has a sewn in belt, stirrups on each pant leg and a zipper up the back. A replica silver and black combadge completes the costume. View Full Item

U.S.S. Stargazer Plaque The metallic bronze dedication plaque is made of molded resin with a raised border, bolts and text destressed to look old. It also has a communicator badge glued on and off white metallic printed text. It measures approximately 14 x 10 inches. It is signed on the verso “Mike Okuda.” View Full Item

Starfleet signs They signs include: a yellow rectangular room location sign with rounded edges printed in metallic copper labeled “Reva 7,” a large yellow Starfleet embalm printed in metallic copper, a yellow "Quantum Mechanics Lab" door sign printed in metallic copper, and two brown "Restricted Access" decals. View Full Item

Promellian Battlecruiser Sign The gray cardboard 11 ½ x 4 ½ inch sign is rectangular with jagged sides. It is printed lavender with a thick line that follows the edges and with various vertical lines, some with arrows. View Full Item

Château Picard library bookcase decorations The bookcase decorations include three framed pictures, two of a younger Picard (Photograph of Cadet Picard 2326 and pencil sketch of Ensign Picard 2330) and one of Picard with Mark Twain (San Francisco 1893) and various other curios, collectibles, and objetd d'art. View Full Item

World Razer Oil Painting This oil painting by Andrea Dopaso (52 in. x 26 in.) shows the World Razer with phasers firing while attaching a Borg cube. It was painted on canvas and placed on a wood stretcher bar. The painting is signed in brown on the lower left corner “A DoPaso.” The screen used painting is also mounted in the screen used frame (62.25 in. x 35.75 in. x 2 in.). View Full Item

Château Picard Mantel Decorations This group of decorations include a 1950’s era wood mantel clock and various curios, collectibles, and objets d'art. View Full Item

Trill Symbiont The tear drop shaped brownish yellow symbiont is made of foam latex with folded skin. It is highlighted with florescent red veins and yellow, green, blue, and red spots. View Full Item

Starship Galaxy Class LCARS Panel The panel is 24" x 30" and is made of black and clear film with gel on the verso filling the clear areas with a single layer of orange gel on the top graphic and a double layer of orange gel on the bottom graphic. ... View Full Item

Corvan Gilvos The latex puppet has bark-like skin, small branch-like arms, resin eyes, and a long snout. It is painted to resemble tree bark. The bottom is open so a puppeteer could place his hand inside and operate it for the scenes in its cage. View Full Item

Ian Troi's Costume The jumpsuit consists of pale olive-green legs with tan puckered sleeves and a patterned off white and brown velvet on the chest and back. View Full Item

Sarek’s Ears The Vulcan ears (~2 ½ in. x 2 in.) are composed of a foam latex material and feature hand painted detailing. The left ear is longer than the right ear by ¼ in. View Full Item